Lee Precision Large Series 2-Die Set .50 BMG
The Lee Precision Large Series (1 1/4x12 thread) 2-Die set for 50 BMG. Includes a Full Length Sizer that allows you to restore any case to factory original dimensions. A Bullet Seating Die that works with nearly any point style bullet.
The Lee Precision Large Series (1 1/4x12 thread) 2-Die set for 50 BMG. Very Limited Production. Includes a Full Length Sizer that allows you to restore any case to factory original dimensions. So you can fire form in your gun. Also includes a Bullet Seating Die, that works with nearly any point style bullet and has a simple finger adjustable seating depth. Tapered on end for use with automatic bullet feeders and is equipped with a floating bullet seating punch for maximum accuracy.
INCLUDES:
- Full Length Sizing Die (Needs Lubrication)
- Bullet Seating Die
- Instructions/Load Data
Notes:
- Shell holder, Powder Dipper, Load Data & Case Resizing Lube are NOT included.
- For Up-To-Date Bullet Load Data try HODGDON Powder Co.
- Speer advises that Speer bullets should not be used with certain Lee Dies. All other brands work great!
- If for any reason you do not use the Lee Resizing Lubricant, be very carefull not to contaminate the powder or primers. Other brands are oil base and have serious, detrimental effects on powder & primers. Because of the stickiness, they also attract grit that can damage the die.
- These dies require a Classic Cast Press or similar press that can accept the Large series 1 1/4-12 thread.
Caution:
- If your using a Steel Sizer, be sure to lubricate your cases. Without lubrication, your die will be damaged and the case may become stuck in the die
- Seating bullets excessively deep will reduce the case capacity and increase the pressure. It is Extremely Important that full wadcutter bullets be used with light loads ONLY. You can select these by their reduced velocity.
IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS
FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:
- DO NOT USE more powder than recommended
- DO NOT USE a heavier bullet than recommended
- DO NOT SEAT the bullet deeper than normal
- DO NOT USE magnum primers unless using a slow burning ball powder
- Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
- High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures
WARNING:
Ammunition reloading can be dangerous if done improperly, and should not be attempted by persons not willing and able to read and follow the instructions included with each product exactly.
- Always wear safety glasses when reloading and shooting.
- Ammunition loaded with these tools should be used in modern guns, in good condition.
- Children should not be permitted to reload ammunition without strict parental supervision.
- Primers and gun powders, like gasoline and matches, can be dangerous if improperly handled or misused.
- We do not accept responsibility for ammunition loaded with these tools, as we have no control over the manufacture and storage of components or the loading procedure and techniques used.
Help for product 90515
Parts | Manual |
Product WARNINGS:
We are required to provide Prop 65 product warnings by California's Dear Leader. Please give them appropriate attention.
Prop 65: Warning: Handling live primers and spent primers may expose you to lead or other chemicals, which are known to the State of California to cause reproductive harm and cancer. For more information, go to www.P65Warnings.ca.gov.
Prop 65: Warning:
Lee Precision Large Series 2-Die Set .50 BMG
Brand: | Lee Precision |
---|---|
Product Code: | 90515 |
Reward Points: | 88 |
Only Ships to: | Selected Countries |
Availability: | Out Of Stock - No Backorder |
MSRP: | 170.00 |
---|---|
MPN: | 90515 |
Condition: | new |
Country of Origin: | United States |
Package Quantity: | 1 |
Product Weight: | 2.25 lbs |
UPC: | 7343079051560 |
Calibers: | .50 Bmg |
Language: | Engllish |
-
$141.89
- Price in reward points: 5274
Parts | Manual |